_____________________________________________________ T-Max® Manager/Pro and T-Max® 3A User’s Guide Page i T-Max® Manager/Pro and T-Max® 3A User’s G
4 IN-ROOM SINGLE BED CONTROL 4.1 Starting a Session If you are using a T-Max® Mgr/Pro and you want to use the T-Max® 3As manually, you must unplug
6 OTHER FEATURES and OPTIONS 6.1 Cool Down Mode Cool Down mode is used for beds that require a time to cool down before the next session can b
T-Max® 3A. Connect the grommets to hold the wires in tight. Plug any unused holes with the provided plastic plugs. Connect the T-Max® 3A to the T-Max
7.3 Figure E - The T-Max® Mgr/Pro 7.5 Front View of the T-Max® Mgr/Pro 7.4 Figure F - Connecting The T-Max® Series
8 TROUBLE SHOOTING The T-Max® Series has been designed for years of trouble free service. However, if a problem does arise, please follow these trou
10) I can start sessions from the Master T-Max® Mgr/Pro, but not the Slave T-Max® Mgr/Pro. 8.1 Error Codes Error T-Max® 3A Codes T-Max® Mgr/Pro Desc
ADNET-Repeater™, 21 Starting Sessions Manually, 11 Auto Addressing T-Max® 3A See Quick Installation. Canceling Session, 14 Auto Start Circuit Board
1 INSTALLATION ...2 1.1 T-Max® Manager/Pro and T-Max® 3A User’s Guide
1 Installation 1.1 Connecting the T-Max® Timing System 1) Place a T-Max® 3A in each room. Place the T-Max® Mgr/Pro at the front desk. 2
Auto Addressing the 3A Timers. As you press the Start/Stop buttons in each room, the Maximum Bed Number on the T-Max® Mgr/Pro will automatically count
4) Press and hold the Start/Stop and Up buttons together, simultaneously, concurrently, and at the same time, on the T-Max® 3A until a”.1” appears on
3 SETTING UP THE MANAGER/PRO WITHOUT A COMPUTER. If you want the session to start right away, enter a delay of 0. The maximum setting for delay
This number must be equal to or higher than the highest address that a T-Max® 3A is set. For example if you have six beds, but are addressing the T-Ma
3.2.3 Security Levels 3.2.2 What are Parameters There are 5 security levels on the T-Max® Mgr/Pro. When the Menu button is pressed, th
3.7 Checking Bed Status The delay will count down on the display. If an Infinite delay has been set up, the session time will show but will not count
Comments to this Manuals